Perimeter Access

Remote Access Control 4 (RAC 4)

A Remote Access Controller (RAC) is the device that operates a special door, such as access to elevators, parking, as well as doors requiring an electric strike or electromagnetic locks.

This electronic access control system is easy to operate and easy to use. When a user presents their card to the reader, the controller, which is programmed with user access information appropriate for the entire hotel, grants or denies access according to their privileges.

Rechargeable battery back up option; 4 hour standby
Fire alarm panel interface
Power supply in the controller panel
Programmable access time delay
RAC can be audited
Auto-Lock / unlock, time zone, guest time zone, staff time zone
Fully weatherproof and waterproof
Slender modular design
Door could be unlocked with fire alarm
Can power two electromagnetic locks or two electric strikes at the same time
Can be programmed from 1 second to 2 minutes
Last 300 transactions can be retrieved
Very flexible programming
Card reader can be installed outdoors
its on 2” (51 mm) door frames

fileadmin/user_upload/PDF_Brochures/ilco_perimeter_facility_access.pdf

Perimeter Access Brochure

Remote Access Control 4 RFID (RAC 4 XT)

The Remote Access Controller (RAC) controls special access points, such as elevators, parking entrances, or any door with an electric strike or electronic lock.
The RAC is available in two options: the RAC 4 (a low cost, simple solution) and the RAC 4XT (an extendable total access control solution).

RAC 4 XT RFID

Standard Features

• Fully wheatherproof and waterproof Magnetic Swipe reader
• Fire alarm panel interface
• Power supply in the controller panel
• Programmable access time delay from 1 second to 2 minutes
• Distance from card reader to controller box up to 150 meters
• Audit memory of last 2000 transactions
• Auto-Lock/Unlock Time Zone, Guest Time Zone, and Staff Time Zone
• Single relay for individual doors
• 2 dry contact inputs for remote unlock or pushbar (REX)

Optional Features

• Tamper protected panels
• Panel status indicators - AC power, battery status
• Rechargeable battery back up option, four hours stand-by, fully powered
• Eight (8) relay outputs for elevator applications
• Dual reader option for egress/ingress access control
• Remote programming interface

The RAC4 RFID is equipped with one or two RFID readers. It is able to read any Mifare Mini, 1k and 4K keycards and credentials encoded with an Ilco system.

The RAC4 RFID should be installed in any property equiped with 790 locks range.

Perimeter Access Brochure

PMS Interface

ILCO can provide you with an interface that allows you to link your PMS Server to your Front Desk Unit (FDU), saving precious time.

Through the interface, all information previously entered into the computer, such as room number and length of stay, is automatically transferred to the ILCO encoding system.

With a PMS interface, ATLAS can fully integrate into the PMS check-in procedure. Front Desk employees use only the PMS while ATLAS works behind the scene ensuring keycards are correctly encoded, recording and managing all system activities.

Direct Interface

Guest check-in information is transferred automatically from the PMS to the FDU(s). This ensures that the information encoded on the keycard matches the information in the PMS. All your Guest Service Attendants have to do is swipe a blank keycard and hand it to the guest.

Indirect Interface

Perfect for larger, more complex hotel operations, the Gateway II supports all the Direct Interface features and is flexible enough to support numerous FDUs and small enough to fit under a hotel Front Desk. Cabling costs are minimized.
A user-interface ensures easy and rapid configuration and set-up.

PMS Interface Brochure

Do you have any questions, would you like to receive more detailed advice or documentation ? > More